Toyota
Jeep Cherokee
 Service Manual
Cooling system » Removal and installation
Coolant reserve tank

REMOVAL

(1) Remove the tube clamp at the tank and remove tube.

Fig. 22 Auxiliary Air-To-Oil Cooler
Fig. 22 Auxiliary Air-To-Oil Cooler

1 - AIR CONDITIONING CONDENSER
2 - HOSE CLAMPS (2)
3 - AUXILIARY AUTOMATIC TRANSMISSION OIL COOLER
4 - MOUNTING BOLT
5 - MOUNTING BOLT

(2) Remove the tank mounting bolts and remove tank (Fig. 23) (Fig. 24).

Fig. 23 Reserve/Overflow Tank-Except Right Hand Drive
Fig. 23 Reserve/Overflow Tank-Except Right Hand Drive

1 - COOLANT RESERVE/OVERFLOW TANK
2 - CLAMP
3 - MOUNTING BOLTS
4 - TUBE TO RADIATOR

Fig. 24 Reserve/Overflow Tank-With Right Hand Drive
Fig. 24 Reserve/Overflow Tank-With Right Hand Drive

1 - CLAMP
2 - COOLANT RESERVE/OVERFLOW TANK
3 - MOUNTING BOLTS
4 - LOWER BRACKET
5 - TUBE TO RADIATOR

INSTALLATION

(1) Position tank and tighten to 2 N·m (17 in. lbs.) torque.

(2) Position tube and secure clamp.

    More about «Removal and installation»:

    Transmission oil coolers

    Coolant reserve tank

    Water pump

    Thermostat

    Radiator-2.5L

    Radiator-4.0L

    Electric cooling fan-2.5L

    Electric cooling fan-4.0L

    Block heater

    Engine accessory drive belts

    Cooling system fans

    Viscous fan drive removal/ installation

    Jeep Cherokee Service Manual / Cooling system / Removal and installation / Coolant reserve tank

    Jeep Cherokee Service Manual

    Categories


    © 2017-2023 Copyright www.jcherokee.com