Jeep Cherokee (XJ): Diagnosis and testing

Previous pageDescription and operation

Battery DESCRIPTION 1 - POSITIVE POST 2 - VENT 3 - CELL CAP 4 - TEST INDICATOR 5 - CELL CAP 6 - VENT 7 - NEGATIVE POST 8 - GREEN BALL 9 - ELECTROLYTE LEVEL 10 - PLATE GROUPS 11 - LOW-MAIN ...

Next pageBattery

DIAGNOSIS The battery, starting system and charging system in the vehicle operate with one another, and must be tested as a complete system. In order for the engine to start and the battery to ch ...

Other materials:

Body side molding. Rear fender flare. Quarter window applique
Body side molding REMOVAL (1) Loosen the body side molding (Fig. 60) with a heat gun. (2) Lift edge of molding with a putty knife and peel molding from body panel. Apply heat to any location where the molding remains adhered to a panel. (3) Remove the adhesive from the body panel with Mo ...