Toyota
Jeep Cherokee
 Service Manual
Brakes » Base brake system » Removal and installation
Disc brake rotor

REMOVAL

(1) Remove wheel and tire assemble.

(2) Remove caliper.

(3) Remove retainers securing rotor to hub studs (Fig. 33).

(4) Remove rotor from hub.

(5) If rotor shield requires service, remove front hub and bearing assembly.

Fig. 33 Rotor & Hub
Fig. 33 Rotor & Hub

1 - ROTOR
2 - RETAINER
3 - BEARING NUT
4 - NUT LOCK
5 - COTTER PIN
6 - WASHER

INSTALLATION

(1) If new rotor is being installed, remove protective coating from rotor surfaces with carburetor cleaner.

(2) Install rotor on hub.

(3) Install caliper.

(4) Install wheel and tire assembly.

    More about «Removal and installation»:

    Brake lamp switch

    Brake pedal

    Combination valve

    Master cylinder

    Power brake booster

    Front disc brake caliper

    Front disc brake shoes

    Disc brake rotor

    Drum brake shoes

    Wheel cylinder

    Brake support plate

    Rear parking brake cables

    Parking brake lever

    Jeep Cherokee Service Manual / Brakes / Base brake system / Removal and installation / Disc brake rotor

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com