Toyota
Jeep Cherokee
 Owners Manual
Starting and operating » Starting procedures
Extended Park Starting

NOTE: Extended Park condition occurs when the vehicle has not been started or driven for at least 30 days.

1. Install a battery charger or jumper cables to the battery to ensure a full battery charge during the crank cycle.

2. Cycle the ignition in the START position and release it when the engine starts.

3. If the engine fails to start within ten seconds, cycle the ignition to the STOP (OFF/LOCK) position, wait five seconds to allow the starter to cool, then repeat the Extended Park Starting procedure.

4. If the engine fails to start after eight attempts, allow the starter to cool for at least 10 minutes, then repeat the procedure.

CAUTION!

To prevent damage to the starter, do not crank continuously for more than 10 seconds at a time. Wait 10 to 15 seconds before trying again.

    More about «Starting procedures»:

    Normal Starting

    Extended Park Starting

    If Engine Fails To Start

    Jeep Cherokee Owners Manual / Starting and operating / Starting procedures / Extended Park Starting

    Jeep Cherokee Owners Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com