Toyota
Jeep Cherokee
 Service Manual
Frame and bumpers » Bumpers
Front bumper end cap

REMOVAL

(1) Remove the rivet attaching the end cap to the air deflector.

(2) Remove the bolts and nuts attaching the end cap to the bumper (Fig. 1).

(3) Pull back the wheelhouse liner and remove the screws attaching the end cap to the front fender.

(4) Lifting the end cap from the bottom, tilt slightly upward and slide it outward to disengage the retainer tab from the bumper (Fig. 2).

(5) Separate the end cap from the bumper.

INSTALLATION

(1) Position the end cap on the bumper and engage the retaining tab.

(2) Install the screws attaching the end cap to the front fender.

(3) Install the bolts attaching the end cap to the bumper. Tighten the nut to 9 N·m (7 ft. lbs.) torque.

Fig. 1 Front Bumper
Fig. 1 Front Bumper

1 - U-NUT
2 - TOW HOOK SUPPORT BRACKET
3 - END CAP
4 - RIVET
5 - AIR DEFLECTOR
6 - MOUNTING BRACKET
7 - BUMPER

Fig. 2 Bumper End Cap
Fig. 2 Bumper End Cap

1 - RETAINER TAB
2 - BUMPER END CAP
3 - BUMPER
4 - GRILLE

(4) Install the rivet attaching the end cap to air deflector.

    More about «Bumpers»:

    Front bumper end cap

    Front bumper

    Front tow hook

    Rear bumper end cap

    Rear bumper

    Rear tow hook

    Jeep Cherokee Service Manual / Frame and bumpers / Bumpers / Front bumper end cap

    Jeep Cherokee Service Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com