Toyota
Jeep Cherokee
 Service Manual
Exhaust system » Removal and installation
Heat shields

REMOVAL

(1) Raise and support the vehicle.

(2) Remove the screws and/or nuts holding the heat shields to the frame and/or floor pan (Fig. 12).

Fig. 12 Heat Shield Removal/Installation
Fig. 12 Heat Shield Removal/Installation

1 - BOLTS
2 - MUFFLER HEAT SHIEL
3 - NUTS
4 - FLOOR PAN

(3) When removing muffler heat shield, the muffler front support bracket must be removed first.

(4) Slide the shields out around the exhaust system.

INSTALLATION

(1) Position the heat shields to the floor pan or the frame and install the screws and/or nuts.

(2) Tighten the nuts and/or screws to 45 N·m (33 ft. lbs.) (Fig. 12).

(3) Lower the vehicle.

    More about «Removal and installation»:

    Exhaust pipe

    Catalytic converter

    Muffler and tailpipe

    Heat shields

    Jeep Cherokee Service Manual / Exhaust system / Removal and installation / Heat shields

    Jeep Cherokee Service Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com