Toyota
Jeep Cherokee
 Service Manual
Cooling system » Description and operation
Hose clamps

DESCRIPTION

The cooling system utilizes both worm drive and spring type hose clamps. If a spring type clamp replacement is necessary, replace with the original Mopart equipment spring type clamp.

CAUTION: A number or letter is stamped into the tongue of constant tension clamps. If replacement is necessary, use only a original equipment clamp with matching number or letter (Fig. 11).

Fig. 11 Spring Clamp Size Location
Fig. 11 Spring Clamp Size Location

1 - SPRING CLAMP SIZE LOCATION

OPERATION

The worm type hose clamp uses a specified torque value to maintain proper tension on a hose connection.

The spring type hose clamp applies constant tension on a hose connection. To remove a spring type hose clamp, use Special Tool 6094 or equivalent, constant tension clamp pliers (Fig. 12) to compress the  hose clamp.

Fig. 12 Hose Clamp Tool
Fig. 12 Hose Clamp Tool

1 - HOSE CLAMP TOOL 6094
2 - HOSE CLAMP

    More about «Description and operation»:

    Cooling system

    Automatic transmission oil cooler

    Coolant reserve/overflow system

    Cooling system fans

    Block heater

    Thermostat

    Radiator

    Radiator pressure cap

    Water pump

    Hose clamps

    Viscous fan drive

    Electric cooling fan

    Jeep Cherokee Service Manual / Cooling system / Description and operation / Hose clamps

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com