Toyota
Jeep Cherokee
 Owners Manual
Maintaining your vehicle » Bulb replacement
Liftgate Mounted Back-up Lamp

1. Open the liftgate.

2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate.

3. Once the trim is loose, pull it back exposing the trim panel.

4. Using a fiber stick or flat blade screw driver, open the trim panel exposing the back of the liftgate lamp.

5. Disconnect the electrical connector.

6. Twist the socket counterclockwise and remove from lamp.

7. Pull the bulb to remove it from the socket.

8. Replace the bulb, reinstall the socket.

9. Connect the electrical connector.

10. Reinstall the trim panel and the lower trim.

11. Close the liftgate.

License Plate Lamp

1. Using a small screwdriver, press inward the locking tab on the side of the lamp assembly and pull down on the lamp assembly for removal.

2. Pull bulb from socket, replace, and reinstall the lamp assembly into place ensuring the locking tab is secure.

Fluid capacities

Fluid capacities

    More about «Bulb replacement»:

    Low Beam And High Beam Headlamps

    Front Turn Signals And Front Side Marker Lamps

    Front Fog Lamp

    Front Fog Lamp (Trailhawk)

    Bodyside Mounted Back-up Lamp

    Liftgate Mounted Back-up Lamp

    Jeep Cherokee Owners Manual / Maintaining your vehicle / Bulb replacement / Liftgate Mounted Back-up Lamp

    Jeep Cherokee Owners Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com