Toyota
Jeep Cherokee
 Service Manual
Frame and bumpers » Bumpers
Rear bumper

REMOVAL

(1) For vehicles equipped with a trailer hitch, remove hitch before removing bumper. If necessary, refer to removal procedure within Group 13, Frame and Bumpers.

(2) Remove bumper end caps.

(3) Remove upper nuts that attach bumper to bumper support brackets (Fig. 5).

(4) Remove lower bolts that attach bumper to bumper support brackets.

(5) Remove bumper from vehicle.

(6) If necessary, remove bumper support brackets from the rear sill.

INSTALLATION

(1) If removed, install bumper support brackets on the rear sill. Tighten bolts to 55 N·m (41 ft. lbs.) torque.

(2) Position bumper on support brackets.

(3) Install bolts that attach bumper to bumper support brackets. Tighten nuts to 55 N·m (41 ft. lbs.) torque.

(4) Install bumper end caps.

(5) If removed, install trailer hitch.

Fig. 5 REAR BUMPER END CAP
Fig. 5 REAR BUMPER END CAP

1 - SPLASH SHIELD
2 - REAR SILL
3 - BRACKET
4 - STUD
5 - RIVET
6 - RETAINER
7 - END CAP
8 - PLASTIC BLIND RIVET
9 - BUMPER

    More about «Bumpers»:

    Front bumper end cap

    Front bumper

    Front tow hook

    Rear bumper end cap

    Rear bumper

    Rear tow hook

    Jeep Cherokee Service Manual / Frame and bumpers / Bumpers / Rear bumper

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com