Jeep Cherokee (XJ): Removal and installation

Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Chime/buzzer warning systems > Removal and installation

CHIME WARNING SYSTEM SWITCHES

Service procedures for the various hard-wired switches used in the chime warning system can be found in the proper group as follows:

  •  Driver door jamb switch - refer to Group 8L - Lamps
  •  Driver seat belt switch - refer to Group 23 - Body
  •  Headlamp switch - refer to Group 8E - Instrument Panel Systems
  •  Key-in ignition switch - refer to Group 8D - Ignition Systems.

    Previous pageDiagnosis and testing

    Driver door jamb switch For circuit descriptions and diagrams, refer to 8W-40 - Instrument Cluster or 8W-44 - Interior Lighting in Group 8W - Wiring Diagrams. WARNING: ON VEHICLES EQUIPPED WITH A ...

    Next pageOverhead console systems

    ...

    Other materials:

    Valve spring and seal. Cylinder head. Cylinder head
    Valve spring and seal This procedure can be done with the engine cylinder head installed on the block. REMOVAL Each valve spring is held in place by a retainer and a set of conical valve locks. The locks can be removed only by compressing the valve spring. (1) Remove the engine cylinder head ...