Jeep Cherokee (XJ): Specifications

Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Speed control system > Specifications

TORQUE CHART

Description Torque

Servo Mounting Bracket-to-Servo Nuts . . . 8.5 N·m (75 in. lbs.)
Servo Mounting Bracket-to-Body Bolts . . . . . 2 N·m (20 in. lbs.)
Speed Control Switch Mounting Screws . . . 1.5 N·m (14 in. lbs.)
Vacuum Reservoir Mounting Bolts . . . . . . . . 8 N·m (72 in. lbs.)

    Previous pageRemoval and installation

    Speed control servo REMOVAL (1) Disconnect negative battery cable at battery. (2) Disconnect vacuum line at servo (Fig. 1). (3) Disconnect electrical connector at servo. (4) Disconnect servo ...

    Next pageTurn signal and hazard warning systems

    ...

    Other materials:

    Valve spring and seal. Cylinder head. Cylinder head
    Valve spring and seal This procedure can be done with the engine cylinder head installed on the block. REMOVAL Each valve spring is held in place by a retainer and a set of conical valve locks. The locks can be removed only by compressing the valve spring. (1) Remove the engine cylinder head ...