Toyota
Jeep Cherokee
 Service Manual
Transmission and transfer case » AW-4 automatic transmission » Diagnosis and testing
Torque converter stator clutch inspection

(1) Insert Rotating Tool 7547 into converter hub and seat tool in one-way clutch (Fig. 43).

(2) Insert Stopper Tool 7548 in one converter hub notch and into outer race of rotating tool.

(3) Turn rotating tool clockwise. Converter clutch should rotate freely and smoothly. Less than 2.5 N·m (22 in. lbs.) of torque should be required to rotate clutch in clockwise direction.

(4) Turn rotating tool in counterclockwise direction.

Converter clutch should lock.

(5) Replace converter if clutch binds or will not lock.

    More about «Diagnosis and testing»:

    General diagnosis information

    Effects of incorrect fluid level

    Causes of burnt fluid

    Fluid contamination

    Preliminary inspection and adjustment

    Manual shifting test

    Hydraulic pressure test

    Pressure test analysis

    Time lag test

    Test procedure

    Time lag test analysis

    Service diagnosis

    Transmission solenoid testing

    Park/neutral position switch

    Gearshift cable

    Throttle valve cable

    Speed sensor testing

    Flow testing transmission main cooler

    Torque converter stator clutch inspection

    Jeep Cherokee Service Manual / Transmission and transfer case / AW-4 automatic transmission / Diagnosis and testing / Torque converter stator clutch inspection

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com