Jeep Cherokee
Service Manual
Lamps » Lamp bulb service
Underhood lamp bulb

REMOVAL

(1) Insert a small flat blade in the access slot between the lamp base and lamp lens.

(2) Pry the lamp lens upward and remove the lamp lens (Fig. 7).

(3) Depress the bulb terminal inward (Fig. 8) to release the bulb.

Fig. 7 Underhood Lamp Lens

1 - LAMP
2 - LAMP LENS

Fig. 8 Underhood Lamp Bulb

1 - BULB
2 - DEPRESS TERMINAL INWARD
3 - BULB WIRE LOOP
4 - LAMP BASE

INSTALLATION

(1) Engage the replacement bulb wire loop to the terminal closest to the lamp base wire connector

(2) Depress the opposite terminal inward and engage the remaining bulb wire loop.

(3) Position the lamp lens on the lamp base and press into place.

More about «Lamp bulb service»:

Headlamp bulb