Toyota
Jeep Cherokee
 Owners Manual
Understanding your instrument panel » Uconnect settings » Customer Programmable Features/Personal Settings - Uconnect 5.0 Settings
Display

After pressing the "Display" button on the touchscreen the following settings will be available.

  • Display Mode

When in this display you may select the "Auto" or "Manual" display settings. To change Mode status, press and release the "Auto" or "Manual" button on the touchscreen. Then press the arrow back button on the touchscreen.

NOTE: When Day or Night is selected for the Display Mode, the usage of the Parade Mode feature will cause the radio to activate the Display Brightness Day control even though the headlights are on.

Display Brightness With Headlights ON

When in this display, you may select the overall screen brightness with the headlights on. Adjust the brightness with the "+" and "-" setting buttons on the touchscreen or by selecting any point on the scale between the "+" and "-" buttons on the touchscreen.

NOTE: To make changes to the Display Brightness with Headlights ON setting, the headlights must be on and the interior dimmer switch must not be in the party or parade positions.

Display Brightness With Headlights OFF

When in this display, you may select the overall screen brightness with the headlights off. Adjust the brightness with the "+" and "-" setting buttons on the touchscreen or by selecting any point on the scale between the "+" and "-" buttons on the touchscreen.

NOTE: To make changes to the Display Brightness with Headlights OFF setting, the headlights must be off and the interior dimmer switch must not be in the party or parade positions.

Set Language

When in this display, you may select one of multiple languages (English / Français / Español) for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the "Set Language" button on the touchscreen, then select the desired language button on the touchscreen.

Units

When in this display, you may select to have the DID, odometer, and navigation system (if equipped) changed between US and Metric units of measure. Press "US" or "Metric" to make your selection.

Touchscreen Beep

When in this display, you may turn on or shut off the sound heard when a button on the touchscreen is pressed. Press the "Touchscreen Beep" button on the touchscreen then select from "on" or "off."

Navigation Turn-By-Turn In Cluster - If Equipped

When this feature is selected, the turn-by-turn directions will appear in the display as the vehicle approaches a designated turn within a programmed route. To make your selection, press the "Navigation Turn-By-Turn In Cluster" button on the touchscreen, until a check-mark appears next to the setting, showing that setting has been selected.

Control Screen Time-Out - If Equipped

When this feature is selected, the Controls Screen will stay open for five seconds before the screen times out.

With the feature deselected, the screen will stay open until it is manually closed. Press the Control Screen Time-Out button on the touchscreen until a check-mark appears next to the setting, showing that setting has been selected.

    More about «Customer Programmable Features/Personal Settings - Uconnect 5.0 Settings»:

    Display

    Voice

    Safety & Driving Assistance

    Lights

    Doors & Locks

    Engine Off Options

    Compass Settings - If Equipped

    Audio

    Phone/Bluetooth

    SiriusXM Setup - If Equipped

    Restore Settings

    Jeep Cherokee Owners Manual / Understanding your instrument panel / Uconnect settings / Customer Programmable Features/Personal Settings - Uconnect 5.0 Settings / Display

    Jeep Cherokee Owners Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com