Jeep Cherokee

 Owners Manual

Understanding the features of your vehicle » Lights
Headlight Time Delay

This feature provides the safety of headlight illumination for up to 90 seconds (programmable) when leaving your vehicle in an unlit area.

To activate the delay feature, place the ignition in the OFF position while the headlights are still on. Then, turn off the headlights within 45 seconds. The delay interval begins when the headlight switch is turned off.

If you turn the headlights or parking lights on, or place the ignition in ACC or RUN, the system will cancel the delay.

If you turn the headlights off before the ignition, they will turn off in the normal manner.

NOTE:

• The lights must be turned off within 45 seconds of placing the ignition in the OFF position to activate this feature.
• The headlight delay time is programmable using the Uconnect System, refer to "Uconnect Settings" in "Understanding Your Instrument Panel" for further information.

Headlight Switch

Automatic Headlights - If Equipped

Headlights On With Wipers (Available With Automatic Headlights Only)

Headlight Time Delay

Automatic High Beam Headlamp Control - If Equipped

Daytime Running Lights (DRL) - If Equipped

Fog Lights - If Equipped

Turn Signals

Front Map/Reading Lights

Interior Lights