Jeep Cherokee (XJ): High and low limits. Load value

Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Emission control systems > On-board diagnostics > High and low limits. Load value

High and low limits

OPERATION

The PCM compares input signal voltages from each input device with established high and low limits for the device. If the input voltage is not within limits and other criteria are met, the PCM stores a diagnostic trouble code in memory. Other diagnostic trouble code criteria might include engine RPM limits or input voltages from other sensors or switches that must be present before verifying a diagnostic trouble code condition.

Load value

OPERATION

OPERATION

    Previous pageTrip definition. Component monitors. Non-monitored circuits

    Trip definition OPERATION The term "Trip" has different meanings depending on what the circumstances are. If the MIL (Malfunction Indicator Lamp) is OFF, a Trip is defined as when the Oxygen Senso ...

    Next pageEvaporative emission controls

    Description and operation Evaporation control system OPERATION The evaporation control system prevents the emission of fuel tank vapors into the atmosphere. When fuel evaporates in the fuel tank, t ...

    Other materials:

    Transmission
    CAUTION: The transmission and torque converter must be removed as an assembly to avoid component damage. The converter drive plate, pump bushing, or oil seal can be damaged if the converter is left attached to the driveplate during removal. REMOVAL (1) Disconnect battery negative cable. (2) ...