Jeep Cherokee

 Owners Manual

Understanding your instrument panel » Uconnect settings » Customer Programmable Features/Personal Settings - Uconnect 5.0 Settings
Lights

After pressing the "Lights" button on the touchscreen the following settings will be available.

• Headlights Off Delay

When this feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off. To change the Headlights Off Delay setting, press the "Headlight Off Delay" button on the touchscreen, and choose either 0 sec, 30 sec, 60 sec or 90 seconds.

• Headlight Illumination On Approach

When this feature is selected, it allows the adjustment of the amount of time the headlights remain on after the doors are unlocked with the Remote Keyless Entry (RKE) transmitter. To change the Illuminated Approach status, press the "Illuminated Approach" button and choose either 0 sec, 30 sec, 60 sec or 90 seconds.

• Headlights With Wipers - If Equipped

When this feature is selected, and the headlight switch is in the AUTO position, the headlights will turn on approximately 10 seconds after the wipers are turned on.

The headlights will also turn off when the wipers are turned off if they were turned on by this feature. To make your selection, press the "Lights w/Wipers" button on the touchscreen and make your selection.

• Auto High Beams - If Equipped

When this feature is selected, the high beam headlights will activate/deactivate automatically under certain conditions.

To make your selection, press the "Auto High Beams" button on the touchscreen and make your selection.

Refer to "Automatic High Beam Headlamp Control - If Equipped" in "Understanding The Features Of Your Vehicle" for further information.

• Daytime Running Lights - If Equipped

When this feature is selected, the headlights will turn on whenever the engine is running. To make your selection, press the "Daytime Running Lights" button on the touchscreen and make your selection.

• Flash Lights w/Lock

When this feature is selected, the exterior lights will flash when the doors are locked or unlocked with the Remote Keyless Entry (RKE) transmitter or the Passive Entry Feature. To make your selection, press the "Flash Lights w/Lock" button on the touchscreen and select from "On" or "Off."

Display

Voice

Safety & Driving Assistance

Lights

Doors & Locks

Engine Off Options

Compass Settings - If Equipped

Audio

Phone/Bluetooth

SiriusXM Setup - If Equipped

Restore Settings