Jeep Cherokee (KL): Parksense active park assist system

The ParkSense Active Park Assist system is intended to assist the driver during parallel and perpendicular parking maneuvers by identifying a proper parking space, providing audible/visual instructions, and controlling the steering wheel. The ParkSense Active Park Assist system is defined as "semi-automatic" since the driver maintains control of the accelerator, shift lever and brakes. Depending on the driver's parking maneuver selection, the ParkSense Active Park Assist system is capable of maneuvering a vehicle into a parallel or a perpendicular parking space on either side (i.e., driver side or passenger side).

NOTE:

The driver is always responsible for controlling the vehicle, responsible for any surrounding objects, and must intervene as required.

  • The system is provided to assist the driver and not to substitute the driver.
  • During a semi-automatic maneuver, if the driver touches the steering wheel after being instructed to remove their hands from the steering wheel, the system will cancel, and the driver will be required to manually complete the parking maneuver.
  • The system may not work in all conditions (e.g.

    environmental conditions such as heavy rain, snow, etc., or if searching for a parking space that has surfaces that will absorb the ultrasonic sensor waves).

  • New vehicles from the dealership must have at least 30 miles accumulated before the ParkSense Active Park Assist system is fully calibrated and performs accurately.

    This is due to the system's dynamic vehicle calibration to improve the performance of the feature.

The system will also continuously perform the dynamic vehicle calibration to account for differences such as over or under inflated tires and new tires.

Previous pageEnabling And Disabling ParkSense. Service The ParkSense Park Assist System. ParkSense System Usage Precautions

Enabling And Disabling ParkSense ParkSense can be enabled and disabled with the ParkSense switch, located on the switch panel below the Uconnect display. ParkSense Switch When the ParkSense sw ...

Next pageEnabling And Disabling The ParkSense Active Park Assist System. Parallel Parking Space Assistance Operation/Display. Perpendicular Parking Space Assistance Operation/Display

Enabling And Disabling The ParkSense Active Park Assist System The ParkSense Active Park Assist system can be enabled and disabled with the ParkSense Active Park Assist switch, located on the switch ...

Other materials:

Torque converter. Adapter housing seal. Speed sensor
Torque converter REMOVAL (1) Remove transmission and torque converter from vehicle. (2) Place a suitable drain pan under the converter housing end of the transmission. CAUTION: Verify that transmission is secure on the lifting device or work surface, the center of gravity of the transmiss ...