Jeep Cherokee (XJ): Removal and installation

Previous pageService procedures

Fuel system pressure release procedure Use following procedure if the fuel injector rail is, or is not equipped with a fuel pressure test port. (1) Remove fuel fill cap. (2) Remove fuel pump ...

Next pageFuel filter/fuel pressure regulator. Fuel pump module. Fuel pump inlet filter

Fuel filter/fuel pressure regulator The combination Fuel Filter/Fuel Pressure Regulator is located on the fuel pump module. The fuel pump module is located on top of fuel tank. The filter/regulat ...

Other materials:

Removal and installation
Generator REMOVAL WARNING: DISCONNECT NEGATIVE CABLE FROM BATTERY BEFORE REMOVING BATTERY OUTPUT WIRE (B+ WIRE) FROM GENERATOR. FAILURE TO DO SO CAN RESULT IN INJURY OR DAMAGE TO ELECTRICAL SYSTEM. (1) Disconnect negative battery cable at battery. (2) Remove generator drive belt. Refer to G ...