Jeep Cherokee (XJ): Removal and installation

Previous pageService procedures

LUBRICANT CHANGE (1) Raise and support the vehicle. (2) Remove the lubricant fill hole plug from the differential housing cover. (3) Remove the differential housing cover and drain the lubric ...

Next pageRear axle. Pinion shaft seal. Collapsible spacer

Rear axle REMOVAL (1) Raise and support the vehicle. (2) Position a suitable lifting device under the axle. (3) Secure axle to device. (4) Remove the wheels and tires. (5) Remove the bra ...

Other materials:

Removal and installation
Automatic shutdown (asd) relay The ASD relay is located in the Power Distribution Center (PDC) (Fig. 23). Refer to label on PDC cover for relay location. REMOVAL (1) Remove PDC cover. (2) Remove relay from PDC. (3) Check condition of relay terminals and PDC connector terminals for damage ...