Jeep Cherokee (XJ): Service procedures
- Valve timing. Valve service. Piston fitting
- Piston ring-fitting
- Fitting connecting rod bearings. Fitting crankshaft main bearings. Form-in-place gaskets
- Engine performance. Honing cylinder bores. Repair damaged or worn threads
- Service engine assembly (short block). Hydrostatic lock. Engine oil service
Engine diagnosis-introduction
Engine diagnosis is helpful in determining the
causes of malfunctions not detected and remedied by
routine maintenance.
These malfunctions may be classified as eithe ...
Valve timing. Valve service. Piston fitting
Valve timing
Disconnect the spark plug wires and remove the
spark plugs.
Remove the engine cylinder head cover.
Remove the capscrews, bridge and pivot assembly,
and rocker arms from above the ...
Other materials:
Removal and installation
Battery cables
Both the battery negative cable and the battery
positive cable are serviced in the battery wire harness.
If either battery cable is damaged or faulty, the
battery wire harness unit must be replaced.
REMOVAL
(1) Turn the ignition switch to the Off position. Be
certain that all ...