Jeep Cherokee (XJ): Special tools

COMPASS

COMPASS

    Previous pageRemoval and installation

    Overhead console (1) Disconnect and isolate the battery negative cable. (2) Remove the two screws located forward of the display module that secure the overhead console to the upper windshield o ...

    Next pageEngine

    ...

    Other materials:

    Adjustments
    Hood The hood bolt holes are elongated for fore and aft and side-to-side adjustment. (1) If hood is low to the cowl panel, insert shims between the hinge and hood at the rear hinge bolts. (2) Adjust the hood bumper (Fig. 95) in or out to provide proper hood-to-fender height alignment. (3 ...