Jeep Cherokee (XJ): Specifications

TORQUE

DESCRIPTION TORQUE

Bolts, clutch cover 2.5 L . . . . . . . 31 N·m (23 ft. lbs)
Bolts, clutch cover 4.0 L . . . . . . . 50 N·m (37 ft. lbs)
Bolt/Nut, clutch cyl. mount . . . 23 N·m (200 in. lbs)
Bolt, clutch housing M12 . . . . . . 75 N·m (55 ft. lbs)
Bolt, clutch housing 3/8 . . . . . . . 37 N·m (27 ft. lbs) Bolt, clutch housing 7/16 . . . . . . 58 N·m (43 ft. lbs)
Bolt, clutch housing/trans. . . . . . 46 N·m (34 ft. lbs)
Bolt, dust shield M8 . . . . . . . . . . 8 N·m (72 in. lbs)
Bolt, dust shield lower . . . . . . . . 50 N·m (37 ft. lbs)
Bolt, X-member/frame . . . . . . . . 41 N·m (30 ft. lbs)
Bolt, X-member/rear support . . . 45 N·m (33 ft. lbs.)
Bolts, flywheel 4.0 L . . . . . . . . 142 N·m (105 ft. lbs)
Bolts, flywheel 2.5 L . . . . . . . . . 95 N·m (70 ft. lbs)
Bolt, starter motor . . . . . . . . . . . 45 N·m (33 ft. lbs)
Bolts, U-joints . . . . . . . . . . . . . 19 N·m (170 in. lbs.)

    Previous pageRemoval and installation

    Clutch cover and disc REMOVAL (1) Remove transmission. Refer to procedures in Group 21. (2) If original clutch cover will be reinstalled, mark position of cover on flywheel for assembly referenc ...

    Other materials:

    Adding Washer Fluid. Exhaust System. Cooling System
    Adding Washer Fluid The windshield and rear window washers share the same fluid reservoir. The fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiato ...