Jeep Cherokee
 Service Manual
Brakes » Antilock brakes
Diagnosis and testing


The ABS brake system performs several self-tests every time the ignition switch is turned on and the vehicle is driven. The CAB monitors the systems input and output circuits to verify the system is operating correctly. If the on board diagnostic system senses that a circuit is malfunctioning the system will set a trouble code in its memory.

NOTE: An audible noise may be heard during the self-test. This noise should be considered normal.

NOTE: The MDS or DRB III scan tool is used to diagnose the ABS system. For additional information refer to the Antilock Brake section in Group 8W. For test procedures refer to the Chassis Diagnostic Manual.

    More about «Antilock brakes»:

    Description and operation

    Diagnosis and testing

    Service procedures

    Removal and installation

    Disassembly and assembly


    Jeep Cherokee Service Manual / Brakes / Antilock brakes / Diagnosis and testing

    Jeep Cherokee Service Manual


    © 2017-2023 Copyright