Jeep Cherokee (KL): Green Telltale Indicator Lights. White Telltale Indicator Light
Park/Headlight ON Indicator Light This indicator will
illuminate when the park lights or headlights are turned on. Front Fog Indicator Light - If Equipped This indicator will illuminate
when the front fog lights are on. Turn Signal Indicator Lights The instrument cluster arrow
will flash independently for the LEFT or RIGHT turn signal as selected,
as well as the exterior turn signal lamp(s) (front and rear) as selected
when the multifunction
lever is moved down (LEFT) or up (RIGHT). NOTE: Stop/Start Active Indicator Light - If Equipped This telltale will
illuminate when the Stop/Start function is in "Autostop" mode. LaneSense Indicator Light - If Equipped The LaneSense indicator is solid
green when both lane markings have been detected and
the system is "armed" to provide visual warnings in the EVIC/DID and a
torque warning
in the steering wheel if an unintentional lane departure occurs. Refer
to "LaneSense - If
Equipped in "Understanding The Features Of Your Vehicle" for further
information. Electronic Speed Control Set Indicator Light This light
will turn on when the electronic speed control has been set. LaneSense Indicator Light - If Equipped When the LaneSense system is ON,
the LaneSense indicator is solid white when only the left
lane marking has been detected and the system is ready to provide visual
warnings in the
instrument cluster display if an unintentional lane departure occurs.
Refer to "LaneSense -
If Equipped in "Understanding The Features Of Your Vehicle" for further
information. Electronic Speed Control ON Indicator Light This light will
turn on when the electronic speed control is ON. Adaptive Cruise Control (ACC) Distance Setting Display Light - If Equipped
This will display the distance setting for the ACC system. Refer to
"Adaptive Cruise Control
(ACC)" in "Understanding The Features Of Your Vehicle" for further
information. Hill Decent Control (HDC) Indicator Light - If Equipped This indicator
shows when the Hill Descent Control (HDC) feature is turned on. The lamp
will be on solid when HDC is armed. HDC can only be armed when the
transfer case is in
the "4WD LOW" position and the vehicle speed is less then 30 mph (48
km/h). If these conditions
are not met while attempting to use the HDC feature, the HDC indicator
light will
flash on/off. Blue Telltale Indicator Light High Beam Indicator Light This indicator shows that the
high beam headlights are on. Push the multifunction control
lever away from you to switch the headlights to high beam. Pull the
lever toward you to
switch the headlights back to low beam.Green Telltale Indicator Lights
Green Telltale
Light
What It Means
Park/Headlight ON Indicator Light
Green Telltale
Light
What It Means
Front Fog Indicator Light
Green Telltale
Light
What It Means
Turn Signal Indicator Lights
Green Telltale
Light
What It Means
Stop/Start Active Indicator Light
Green Telltale
Light
What It Means
LaneSense Indicator Light
Green Telltale
Light
What It Means
Electronic Speed Control Set Indicator Light
White Telltale Indicator Light
White Telltale
Light
What It Means
LaneSense Indicator Light
White Telltale
Light
What It Means
Electronic Speed Control ON Indicator Light
White Telltale
Light
What It Means
Adaptive Cruise Control (ACC) Distance Setting Display Light
White Telltale
Light
What It Means
Hill Decent Control (HDC) Indicator Light
Blue Telltale
Light
What It Means
High Beam Indicator Light
Yellow Telltale Indicator Lights
Electronic vehicle information center (evic)
Other materials:
Diagnosis and testing
Trip computer, compass, and
thermometer display module
If the problem with the trip computer, compass,
and thermometer display module is an inaccurate or
scrambled display, use the Self-Diagnostic Test procedures.
If the problem is incorrect display lighting levels,
use a DRB scan tool and th ...