Jeep Cherokee (KL): Warning and indicator lights

IMPORTANT: The warning / indicator light switches on in the instrument panel together with a dedicated message and/or acoustic signal when applicable. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to the information contained in the Owner Manual, which you are advised to read carefully in all cases.

Always refer to the information in this chapter in the event of a failure indication.

All active telltales will display first if applicable. The system check menu may appear different based upon equipment options and current vehicle status. Some telltales are optional and may not appear.

Previous pageInstrument cluster - premium

Premium DID Instrument Cluster 1. Tachometer Indicates the engine speed in revolutions per minute (RPM x 1000). 2. Driver Information Display (DID) When the appropriate conditions ex ...

Next pageRed Telltale Indicator Lights

Seat Belt Reminder Warning Light Red Telltale Light What It Means Seat Belt Reminder Warning LightWhen the ignition switch is first turned to ON/RUN, this light will tur ...

Other materials:

Compressor clutch relay. Dual function high pressure switch/high pressure cut-off switch. Heater performance
Compressor clutch relay RELAY TEST The compressor clutch relay (Fig. 8) is located in the Power Distribution Center (PDC). Refer to the PDC label for relay identification and location. Remove the relay from the PDC to perform the following tests: (1) A relay in the de-energized position shou ...