Jeep Cherokee (XJ): Removal and installation
Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Instrument panel systems > Removal and installation
- Steering column opening cover. Knee blocker. Instrument panel center bezel
- Instrument panel accessory switch bezel. Cigar lighter relay. Cluster bezel
- Headlamp switch. Instrument cluster. Instrument cluster components
- Instrument panel top cover. Glove box. Glove box components
- Glove box latch striker. Instrument panel end cap. Instrument panel center support bracket
- Instrument panel assembly
Instrument panel cigar lighter. Cigar lighter relay. Instrument panel power outlet
Instrument panel cigar lighter
For complete circuit diagrams, refer to Horn/Cigar
Lighter in the Contents of Group 8W - Wiring
Diagrams.
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS,
REFER TO GROUP ...
Steering column opening cover. Knee blocker. Instrument panel center bezel
Steering column opening cover
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS,
REFER TO GROUP 8M - PASSIVE
RESTRAINT SYSTEMS BEFORE ATTEMPTING ANY
STEERING WHEEL, STEERING COLUMN, OR
INSTRUMENT PANEL C ...
Other materials:
Body side molding. Rear fender flare. Quarter window applique
Body side molding
REMOVAL
(1) Loosen the body side molding (Fig. 60) with a
heat gun.
(2) Lift edge of molding with a putty knife and
peel molding from body panel. Apply heat to any
location where the molding remains adhered to a
panel.
(3) Remove the adhesive from the body panel with
Mo ...