Jeep Cherokee (XJ): Specifications
Ignition timing
Ignition timing is not adjustable on any engine.
Engine firing order-2.5L 4-cylinder engine

Engine firing order-4.0L 6-cylinder engine

Spark plugs

Spark plug cable resistance

Ignition coil resistance-2.5L engine

Ignition coil resistance-4.0L engine

Torque chart
TORQUE CHART
DESCRIPTION TORQUE
Camshaft Position Sensor-to-base
bolts-4.0L . . . . . . . . . . . . . . 28 N·m (15 in. lbs.)
Crankshaft Position Sensor Bolts
(sensor mounted with 2 bolts) . . . . . . . . . 19 N·m
(14 ft. lbs.)
Crankshaft Position Sensor Nuts
(sensor mounted with 2 nuts) . . . . . . . . . 19 N·m
(14 ft. lbs.)
Crankshaft Position Sensor Bolt
(sensor mounted with 1 bolt) . . 7 N·m (60 in. lbs.)
Distributor Hold Down Bolt-2.5L . . . . . . . 23 N·m
(17 ft. lbs.)
Distributor Cap Screws-2.5L . . 3 N·m (26 in. lbs.)
Ignition Coil Mounting (if tapped
bolts are used)-2.5L . . . . . . . 5 N·m (50 in. lbs.)
Ignition Coil Mounting (if nuts/bolts
are used)-2.5L . . . . . . . . . . 11 N·m (100 in. lbs.)
Ignition Coil Rail Mounting Bolts-4.0L . . . 29 N·m
(250 in. lbs.)
Oil Pump Drive Hold-down Bolt-4.0L . . . . 23 N·m
(17 ft. lbs.)
Spark Plugs (all engines) . . . . . 41 N·m (30 ft. lbs.)
Other materials:
Cleaning and inspection. Adjustments. Specifications
Cleaning and inspection
PROPELLER SHAFT
Clean all universal joint bores with cleaning
solvent and a wire brush.
Inspect the yokes for distortion, cracks, and
worn bearing cap bores.
Adjustments
Rear axle pinion input angle
Adjust the rear axle pinion input angle on vehicles
...


