Jeep Cherokee (XJ): Specifications. Special tools

Specifications

TORQUE

DESCRIPTION TORQUE

Plugs, Access . . . . . . . . . . . . . . . 19 N·m (14 ft.lbs.)
Bolts, Adapter Housing . . . . . . . 34 N·m (25 ft.lbs.)
Switch, Back-up Light . . . . . . . 44 N·m (32.5 ft.lbs.)
Plugs, Drain and Fill . . . . . . . . 44 N·m (32.5 ft.lbs.)
Bolts, Front Bearing Retainer . . 17 N·m (12 ft.lbs.)
Plugs, Interlock and Detent . . . . 19 N·m (14 ft.lbs.)
Screws, Propeller Shaft Clamp . . . . . . . 16-23 N·m (140-200 in.lbs.)
Bolts, Rear Mount to Transmission . . . . 33-60 N·m (24-44 ft.lbs.)
Nut, Rear Mount Clevis . . 54-75 N·m (40-55 ft.lbs.)
Nuts, Rear Mount to Crossmember . . . . 41-68 N·m (30-50 ft.lbs.)
Pins, Restrictor . . . . . . . . . . . . 27.4 N·m (20 ft.lbs.)
Bolts, Reverse Shift Arm Bracket . . . . . . . . 18 N·m (13 ft.lbs.)
Screw, Shift Arm Set . . . . . . . . . 38 N·m (28 ft.lbs.)
Screws, Shift Fork Set . . . . . . . . 20 N·m (15 ft.lbs.)
Nut, Shift Knob . . . . . . . . 20-34 N·m (15-25 ft.lbs.)
Screws, Shifter Floor Cover . . . . . . . . . . . . 2-3 N·m (17-30 in.lbs.)
Bolts, Shift Tower . . . . . . . . . . . . 18 N·m (13 ft.lbs.)
Nuts, Transfer Case Mounting . . . . . . . 30-41 N·m (22-30 ft.lbs.)

Special tools

AX5

Special toolsSpecial tools

AX5

    Previous pageCleaning and inspection

    AX5 MANUAL TRANSMISSION COMPONENTS GENERAL INFORMATION Clean the transmission components in solvent. Dry the cases, gears, shift mechanism and shafts with compressed air. Dry the bearings with cle ...

    Other materials:

    Removal and installation
    Overhead console (1) Disconnect and isolate the battery negative cable. (2) Remove the two screws located forward of the display module that secure the overhead console to the upper windshield opening reinforcement (Fig. 3). (3) To release the overhead console from the rear mounting bracke ...