Toyota
Jeep Cherokee
 Service Manual
Transmission and transfer case » AX5 manual transmission » Disassembly and assembly
Countershaft

DISASSEMBLY

(1) Remove select fit snap-ring holding the countershaft front bearing onto the countershaft (Fig. 95).

(2) Using Bearing Splitter P-334, a suitable spacer on center of countershaft, and a shop press, remove the countershaft front bearing from the countershaft.

Fig. 95 Countershaft Front Bearing Snap-ring
Fig. 95 Countershaft Front Bearing Snap-ring

ASSEMBLY

(1) Remove any nicks or burrs on countershaft hub with fine emery or crocus cloth.

(2) Position countershaft front bearing on end of countershaft.

(3) Using Special Tool 8109 and a shop press, press bearing onto countershaft.

(4) Select the thickest snap-ring that will fit into the snap-ring groove of the countershaft (Fig. 95).

(5) Install snap-ring to hold countershaft front bearing onto countershaft.

    More about «Disassembly and assembly»:

    Adapter/extension housing and front bearing retainer

    Shift mechanism and geartrain

    Countershaft

    Input shaft

    Output shaft

    Semi-synchronized reverse idler gear

    Jeep Cherokee Service Manual / Transmission and transfer case / AX5 manual transmission / Disassembly and assembly / Countershaft

    Jeep Cherokee Service Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com