Jeep Cherokee (XJ): Diagnosis and testing

Previous pageVacuum reservoir

DESCRIPTION The vacuum reservoir is mounted to the front bumper bar behind the passenger side bumper end cap. The bumper end cap must be removed from the vehicle to access the vacuum reservoir for ...

Next pageA/C performance

The air conditioning system is designed to provide the passenger compartment with low temperature and low humidity air. The evaporator, located in the heater-A/C housing on the dash panel below the ...

Other materials:

Removal and installation
Starter motor REMOVAL 2.5L ENGINE (1) Disconnect and isolate the battery negative cable. (2) Raise and support the vehicle. (3) While supporting the starter motor with one hand, use the other hand to remove the two screws that secure the starter motor to the engine block (Fig. 14). (4 ...