Jeep Cherokee (XJ): Removal and installation
Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Ignition system > Removal and installation
- Spark plug cables. Spark plugs. Ignition coil-2.5L engine
- Ignition coil-4.0L engine. Crankshaft position (CKP) sensor. Camshaft position sensor-2.5L engine
- Camshaft position sensor-4.0L engine
- Distributor-2.5L engine
- Ignition switch and key cylinder
- Shifter/ignition interlock
Distributor cap-2.5L engine
Remove the distributor cap and wipe it clean with
a dry lint free cloth. Visually inspect the cap for
cracks, carbon paths, broken towers or damaged
rotor button (Fig. 8 ...
Spark plug cables. Spark plugs. Ignition coil-2.5L engine
Spark plug cables
REMOVAL
CAUTION: When disconnecting a high voltage
cable from a spark plug or from the distributor cap,
twist the rubber boot slightly (1/2 turn) to break it
loose (Fig. 18). Gra ...
Other materials:
Transmission valve body. Transmission control module. Solenoid harness adapter seal
Transmission valve body
REMOVAL
(1) Remove oil pan plug and drain transmission
fluid.
(2) Remove oil pan and oil screen. Clean pan and
screen in solvent and dry them with compressed air.
(3) Disconnect solenoid wire connectors (Fig. 62).
Mark wires for assembly reference.
Fig. 62 So ...