Jeep Cherokee (XJ): Service procedures
- Valve timing. Valve, guide and seal. Piston-fitting
- Piston ring-fitting
- Connecting rod bearings-fitting
- Fitting crankshaft main bearings
- Form-in-place gaskets. Engine performance. Honing cylinder bores
- Repair damaged or worn threads. Service engine assembly (short block). Hydrostatic lock
- Engine oil service
Engine diagnosis-introduction
Engine diagnosis is helpful in determining the
causes of malfunctions not detected and remedied by
routine maintenance.
These malfunctions may be classified as eithe ...
Valve timing. Valve, guide and seal. Piston-fitting
Valve timing
Disconnect the spark plug wires and remove the
spark plugs.
Remove the engine cylinder head cover.
Remove the capscrews, bridge and pivot assembly,
and rocker arms ...
Other materials:
Torque converter. Adapter housing seal. Speed sensor
Torque converter
REMOVAL
(1) Remove transmission and torque converter
from vehicle.
(2) Place a suitable drain pan under the converter
housing end of the transmission.
CAUTION: Verify that transmission is secure on the
lifting device or work surface, the center of gravity
of the transmiss ...