Jeep Cherokee (XJ): Removal and installation

Previous pageService procedures

BODY LUBRICATION All mechanisms and linkages should be lubricated when necessary. This will maintain ease of operation and provide protection against rust and excessive wear. The weatherstrip seal ...

Next pageGrille. Grille opening panel (gop). Hood

Grille REMOVAL (1) Remove the headlamp/park lamp bezels. (2) Remove the screws attaching the grille to the grille opening panel (GOP) (Fig. 1). (3) Separate the grille from the GOP. Fig. ...

Other materials:

Adjustments. Specifications. Special tools
Adjustments SHIFT LINKAGE ADJUSTMENT (1) Shift transfer case into 4L position. (2) Raise vehicle. (3) Loosen lock bolt on adjusting trunnion (Fig. 97). (4) Be sure linkage rod slides freely in trunnion. Clean rod and apply spray lube if necessary. (5) Verify that transfer case ran ...